R. Martinuzzi, C. Tropea, "The flow around a surface-mounted prismatic obstacle placed in a fully developed channel flow", J. Fluids Eng, Vol.115, P.85-92, (1993).
 H.J. Hussein, R.J. Martinuzzi, "Energy balance for the turbulent flow around a surface mounted cube placed in a channel", Phys. Fluids, Vol. 8, P.764-780, (1996).
 S. Becker, H. Lienhart, F. Durst, "Flow around three-dimensional obstacles in boundary layers", Journal of Wind Engineering and Industrial Aerodynamics, Vol.90, P. 265–279, (2002).
 T.R. Oke, "Street design and urban canopy layer climate". Energy and Buildings, Vol. 11, P. 103-113, (1988).
 E. R. Meinders, K. Hanjalic, "Experimental study of the convective heat transfer from in-line and staggered configurations of two wall-mounted cubes". Int. J. Heat Mass Trans., Vol.45, P.465–482, (2002).
 M. Mazen, R.J. Martinuzzi, "Vortical structures around a surface-mounted pyramid in a thin boundary layer" , Journal of wind engineering and industrial aerodynamics, Vol. 96, No. 6-7, P. 769-778,(2008).
 M. H. Khan, P. Sooraj, A. Sharma, A. Agrawal, "Flow around a cube for Reynolds numbers between 500 and 55,000" Experimental Thermal and Fluid Science,Vol.93, 257-271,(2018).
 W.Rodi, "Comparison of LES and RANS Calculation of The Flow Around Bluff Bodies", Journal of Wind Engineering and Industrial Aerodynamics", 69-71, P.55-75, (1997).
 G. Iaccarino, P.Durbin, "Unsteady 3D RANS simulations using the v2-f model", Annual Research Briefs 263,(1997).
 K. Aliane, "Passive control of the turbulent flow over a surface-mounted rectangular block obstacle and a rounded rectangular obstacle", International. Review of Mechanical. Engineering, Vol. 5, No. 2, (2011).
 Z. Sari-hassoun, K. Aliane, O. Sebbane, "Numerical simulation. study of the. Structure of the separated flow around obstacles: curved edge effect", International Journal on Heat and Mass Transfer - Theory and Applications", Vol. 1, No. 5, (2013).
 B. Rostane, K. Aliane, S. Abboudi, "Three Dimensional. Simulation for Turbulent. Flow Around Prismatic Obstacle with. Rounded Downstream Edge Using the k-ω SST Model", International Review of. Mechanical. Engineering. Vol. 9, No. 3, (2015).
 M. Dehghan, Y. Rahmani, D. D. Ganji, S. Saedodin,M. S. Valipour, S. Rashidi , "Convection- radiation heat transfer in solar heat exchangers filled with a porous medium: Homotopy perturbation method versus numerical analysis" Renewable Energy Vol.74 ,448-455, (2015).
 M. Barzegar Gerdroodbary, D.D. Ganji, Y. Amini "Numerical study of Shock Wave Interaction on Transverse jets through Multiport Injector Arrays in Supersonic Crossflow" Acta Astronautica Vol.115, 422-433,(2015).
 S.M.Mousazadeh,M.M.Shahmardan, T.Tavangar, Kh.Hosseinzadeh, D.D.Ganji, "Numerical investigation on convective heat transfer over two heated wall-mounted cubes in tandem and staggered arrangement" Theoretical and Applied. Mechanics Letters,Vol. 8, No.3, 171-183, (2018).
 F. Menter, "Two-Equation Eddy-Viscosity. Turbulence Models for engineering Application", AIAA Journal, 32, P.1598–1605, (1994).
 D. C. Wilcox, Turbulence Modeling for CFD Second Edition, D.C.W. Industries, (1998).
 W. Jones and B. Launder, "The calculation of low-Reynolds-number phenomena with a two-equation model of turbulence", International Journal of Heat and Mass Transfer, Vol.16, No.6, P . 1119-1130, (1973).
 F. Menter, M. Kuntz, and R. Langtry, "Ten years of industrial experience with the. SST turbulence model Turbulence", Heat and Mass Transfer 4, Begell House, Inc, (2003). https://doi.org/10.1.1.460.2814
 C. M .Rhie, W. L. A Chow, "Numerical Study of the Turbulent Flow Past an Isolated Airfoil with Trailing Edge Separation", AIAA journal, 21, 11, 1525-1532. (1983).
 D. Lakehal, W. Rodi,"Calculation of the flow past a surface mounted cube with two-layer turbulence models". Journal of Wind. Engineering and Industrial. Aerodynamics. 67 and 68, 65-78, (1997).
 K. B. Shah, Large-eddy simulation of the flow past a cubic obstacle, PhD. Thesis, Stanford University, (1998).
 A. Yakhot, H. Liu, N. Nikitin, "Turbulent flow around a wall-mounted cube: A direct numerical simulation". International Journal. of. Heat and Fluid. Flow, Vol. 27, No. 6, P. 994-1009, (2006).
 S. Krajnovi'c, L. Davidson, "Large-eddy simulation of the flow around a bluff body", AIAA journal, Vol. 40, No. 5, P. 927-936, (2002)