Composite Materials
Hamed Khosravi; Reza Eslami-Farsani
Abstract
This work reports the high-velocity impact response of multiscale anisogrid composite (AGC) panels. The aim of the present study is to evaluate the influence of surface-modified multi-walled carbon nanotubes (S-MWCNTs) at different S-MWCNTs contents (0-0.5 wt.% at an interval of 0.1 wt.%) on the high-velocity ...
Read More
This work reports the high-velocity impact response of multiscale anisogrid composite (AGC) panels. The aim of the present study is to evaluate the influence of surface-modified multi-walled carbon nanotubes (S-MWCNTs) at different S-MWCNTs contents (0-0.5 wt.% at an interval of 0.1 wt.%) on the high-velocity impact responses of E-glass/epoxy AGC. Surface modification of MWCNTs is confirmed by Fourier-transform infrared (FTIR) and thermogravimetric (TGA) analyses. AGC panels were fabricated via a manual filament winding technique. E-glass fiber roving and E-glass woven fabric are employed as reinforcing agents in ribs and skin, respectively. The impact test is done on the composite panels by a cylindrical projectile with a conical nose. The results showe that the highest enhancement in the impact characteristics is attributed to the panel containing 0.4 wt.% S-MWCNTs. Based on the analysis of fracture surfaces, enhanced interfacial fiber/matrix bonding is observed for the S-MWCNTs loaded specimen. Furthermore, the incorporation of MWCNTs leads to the reduced damaged area and enhanced tolerance of damage.
Composite Materials
Reza Eslami-Farsani; Hamed Khosravi
Abstract
In the present study, multiscale nanosilica/E-glass/epoxy anisogrid composite panels were investigated for flexural properties as a function of nanosilica loading in the matrix (0, 1, 3 and 5 wt.%). The surface of the silica nanoparticles was firstly modified with 3-glycidoxypropyltrimethoxysilane (3-GPTS). ...
Read More
In the present study, multiscale nanosilica/E-glass/epoxy anisogrid composite panels were investigated for flexural properties as a function of nanosilica loading in the matrix (0, 1, 3 and 5 wt.%). The surface of the silica nanoparticles was firstly modified with 3-glycidoxypropyltrimethoxysilane (3-GPTS). The fourier transform infrared (FTIR) spectroscopy revealed that the organic functional groups of the silane were successfully grafted on the surface of the nanoparticles. It was illustrated that flexural properties of the composite panel loaded from the skin side can be significantly enhanced by incorporating silica nanoparticles. The use of 3 wt.% nanosilica was the most effective in increasing the load bearing capacity and energy absorption value, while the specimen containing 5 wt.% nanosilica demonstrated the highest flexural stiffness. From the results obtained for the anisogrid panels loaded from the skin side, it was found that these structures displayed excellent damage resistance which is represented by their energy absorption capability. Moreover, a significant portion of energy absorbed after the primary failure at the peak load. Finally, the results correlated well with the observation of field emission scanning electron microscopy (FESEM) micrographs where the nanocomposite panels exhibited higher degree of fiber-matrix interfacial strength and also enhanced matrix characteristics, imparted by the incorporation of surface modified silica nanoparticles.
